Filter
Top Products
Connection
23
Connecting to a Video Source
< How to connect 1 >
a. Connect the Video input jacks of the projector to the
output jacks of the A/V source with Video cable.
< How to connect 2 >
b. Connect the S-Video input jack of the projector to the
S-Video output jack of an A/V source with an S-Video
cable.
* You can get better picture quality when connecting
S-Video source to the projector.
S VIDEO
(R) AUDIO (L) VIDEO
OUT
IN
* You can connect a VTR, a camcorder, a LDP or any other compatible video image source to the projector.
<VCR>
Connecting to a DVD
< How to connect >
a.Connect the DVD Component cable to the
RCA to D-Sub Adaptor and then connect the
RCA to D-Sub Adaptor to RGB Input
(PC/DTV) of the projector.
* When connecting the component cable, match the
jack colors with the component cable.(Y=green,
PB=blue, PR=red)
b.If the DVD has HDMI output, connect HDMI
cable to HDMI Input of the projector.
c. If the DVD has DVI output, connect HDMI to
DVI cable to HDMI Input of the projector.
* If connecting the HDMI, audio is not supported.
d.Use a DVD with Component 480i(576i)/
480p(576p)/720p/1080i mode.
PR
PB
Y
(R) AUDIO (L)
HDMI OUTPUTDVI OUTPUT
* The output jacks (Y, P
B, P
R) of the DVD might be labelled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment.
<DVD>
RCAto D-Sub Adaptor
Component cable
HDMI to DVI cable
HDMI cable