Filter
Top Products
Connection
24
Component cable
Connecting to a D-TV Set-Top Box
< How to connect a Component source >
a.Connect the D-TV Set-Top Box Component
cable to the RCA to D-Sub Adaptor and then
connect the RCA to D-Sub Adaptor to
RGB Input (PC/DTV) of the projector.
* When connecting the component cable, match the
jack colors with the component cable.(Y=green,
PB=blue, PR=red)
b.Use a DTV receiver with DTV 480p(576p)/
720p/1080i mode.
< How to connect an RGB/HDMI source >
a.Connect computer cable to RGB Input
(PC/DTV) of the projector.
b.If the D-TV Set-Top Box has HDMI output,
connect HDMI cable to HDMI Input of the
projector.
c.If the D-TV Set-Top Box has DVI output, connect
HDMI to DVI cable to HDMI Input of the
projector.
* If connecting the HDMI, audio is not supported.
d.Use a DTV receiver with DTV 480p(576p)/
720p/1080i mode.
* It can be supported the DVI/HDCP.
(R) AUDIO (L)
DTV OUTPUT
HDMI OUTPUT
PR
PB
Y
DVI OUTPUT
(R) AUDIO (L)
DTV OUTPUT
HDMI OUTPUT
PR
PB
Y
* To receive Digital TV (D-TV) programs, it is necessary to purchase a D-TV receiver (Set-Top Box) and
connect it to the projector.
* Please refer to the owner's manual of the D-TV Set-Top Box for the connection between projector and D-TV
Set-Top Box.
<D-TV Set-Top Box>
RCA to D-Sub Adaptor
HDMI to DVI cable
HDMI cable