LG Electronics AN110W-JD Projection Television User Manual


 
Function
26
Function
Video Menu Options
* In this manual, the OSD(On Screen Display) may be different from your Projectors because it is just example to help
with the Projector operation.
* If there is no input signal present, the Menu will not be displayed on the screen.
* This operating guide explains operation of RGB(PC) mode mainly.
1. Press the MENU button and then use D, E button to select the menu.
2. Press the
G button and then use D, E button to select a video item you
want to adjust.
3. Press the F, G button to adjust the screen condition as you want.
4. Press the AOK button to save.
< RGB mode >
< Video mode >
Each adjustment of menu options will not affect other input source.
As required, re-adjust menu options for the following input source :
Video/S-Video/Component (480i(576i)), Component (480p(576p), 720p, 1080i)
To restore the original image condition after changing it, press AOK button
after selecting [Reset] item.
In the broadcasting system NTSC, the picture item Tint is displayed and can
be adjusted.
To exit the menu display, repeatedly, press the MENU button.
Adjusting Video
1. Press the MENU button and then use D, E button to select the menu.
2. Press the G button and then use D , E button to select APC item.
3. Press the
G button and then use D , E button to adjust the screen
condition as you want.
4. Press the
AOK button to save.
APC (Auto Picture Control)
* Use APC to set the projector for the best picture appearance.
* This function will not work in RGB mode.
Each press of the D, E button changes the screen as shown below.
To exit the menu display, repeatedly, press the MENU button.
Clear
Soft User
Contrast 50
Brightness 50
Reset
Menu Prev.
Contrast 50
G
APC
Contrast 80
Brightness 50
Sharpness 50
Menu Prev.
APC
G
Clear
Soft
User
APC
Contrast 80
Brightness 50
Sharpness 50
Menu Prev.
APC
G
Clear
Soft
User