Filter
Top Products
17
Initial Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on
each Setup menu item, see pages 18 to 20.
To display and exit the Menu:
Press SETUP to display the menu in complete stop
mode. A second press of SETUP will take you back
to initial screen.
To go to the next level:
Press B on the Remote Control.
To go back to the previous level:
Press b on the Remote Control.
General Operation
1. Press SETUP in complete stop mode. The Setup
menu appears.
2. Use v / V to select the desired option then press
B to move to the second level. The screen
shows the current setting for the selected item,
as well as alternate setting(s).
3. Use v / V to select the second desired option
then press B to move to the third level.
4. Use v / V to select the desired setting then
press ENTER to confirm your selection. Some
items require additional steps.
5. Press RETURN, SETUP, or PLAY to exit the
Setup menu.
Display Menu
TV Aspect
4:3 – Select when a standard 4:3 TV is
connected. (4:3 can be affected only when the
resolution is 480i or 480p.)
16:9 Wide– Select when a 16:9 wide TV is
connected.
Display Mode
Display Mode setting is available only when the
TV Aspect mode is set to [4:3].
Letterbox – Displays a wide picture with bands
on the upper and lower portions of the screen.
Panscan – Automatically displays the wide
picture on the entire screen and cuts off the
portions that do not fit.
Notes:
• Display Mode may not be supported on a HD
DVD title.
• The Panscan option does not operate during
BD-ROM playback.
Resolution
Sets the output resolution of the Component and
HDMI video signal.
The number in 480i, 480p, 720p, 1080p and 1080i
indicates the number of lines of video. The “i” and
“p” indicate interlaced and progressive scan,
respectively.
1080p – Outputs 1080 lines of progressive
video. (only for HDMI connection and
BD-ROM/HD DVD discs recorded in 1080p)
1080i – Outputs 1080 lines of interlaced video.
720p – Outputs 720 lines of progressive video.
480p – Outputs 480 lines progressive video.
480i – Outputs 480 lines of interlaced video.
(COMPONENT and VIDEO OUT jack only)
Note:
Refer to “Resolution Setting” on page 16 for details
about the resolution.
Installation and Setup
BH100-N-AA1ULL-ENG 4/6/07 12:02 PM Page 17