LG Electronics DVD-V9800 DVD Player User Manual


 
ENG-20
C
ONNECTIONS
Connecting to an Audio System (Dolby digital, MPEG2 or DTS
Amplifier)
1
Using a Coaxial cable or an Optical cable (not
included), connect the
DIGITAL AUDIO OUT
(COAXIAL)
or DIGITAL AUDIO OUT (OPTICAL)
jack on the rear of the DVD-VCR to the DIGITAL
AUDIO IN (COAXIAL)
or DIGITAL AUDIO IN
(OPTICAL)
jack of the Amplifier.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 52 to 53)
- The jack position may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO or COMPONENT OUT jacks on the rear
of the DVD-VCR to the VIDEO or COMPONENT
IN jack of your TV as described on pages 14 to
18.
Dolby digital or
DTS Amp.
Coaxial Cable
(not included)
Optical Cable
(not included)
01623B_V9800_XAA_Eng1 3/10/08 2:00 PM Page 20