Filter
Top Products
56 Plasma TV
Installation
Operation
Operation
- Be sure to select the RGB-PC/RGB-DTV source before operation.
(For RGB-DTV input source, Position and Reset are available.)
- In RGB-PC/DVI-PC input source, setting are available.
- You can manually adjust picture position and minimize image shaking for the PC input source.
1. Press the ADJUST button and then use
D / E
button to select POSITION, SIZE,
or
PHASE.
2. Press ENTER button and then use
D / E
/ F / G buttons to make appropriate
adjustments.
• The PHASE adjustment range is -16 ~ +16.
• The SIZE adjustment range is -30 ~ +30.
3. Press ENTER button.
•Note: In HDMI/DVI-PC mode, screen
PHASE is not available.
Adjustment for screen Position, Size, and Phase
Adjustment for screen Position, Size, and Phase
Screen Setup for PC mode
Screen Setup for PC mode
1. Press the ADJUST button and then use
D / E
button to select the RESET option.
2. Press ENTER button and then use F / G button to select Yes.
3. Press ENTER button
Initializing (Reset to original factory values)
Initializing (Reset to original factory values)
- To initialize the adjusted values
Close
POSITION G
SIZE
PHASE
RESET
Adjust
D
F
G
E
Close
POSITION
SIZE
PHASE
RESET G
Adjust
Initialize Settings