Filter
Top Products
31
Reference
Reference
This chapter includes important reference information
to help you set your DVD player.
Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
1. Press SETUP. The setup menu appears.
2. Use v / V to select the AUDIO option then press
B to move to the second level.
3. Use v / V to select the Speaker Setup option then
press B to move to the third level. “Select” is
highlighted.
4. Press ENTER and 5.1 Speaker Setup menu
appears.
5. Use b / B to select the desired speaker.
6. Adjust options using v / V / b / B buttons.
7. Press ENTER to confirm your selection. Returns to
the previous menu.
Speaker selection
Select a speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
Size
Press b / B to set a mode. (Large, Small or None)
If you have connected the system to a speaker with a
low frequency of 100Hz or below, select “Large.”
If you have connected the system to a speaker
without a low frequency of 100Hz or below, select
“Small.” If you have not connected a subwoofer,
always select “Large” for Front speaker (L/R).
When you do not have a certain speaker connected,
select “None.”
Front L/R speaker’s size can be set to “Large” or
“Small.”
If Front L/R speaker’s size is set to “Small,” Rear and
Center speaker’s size can be set to “Small” or “None.”
Subwoofer’s size can be set only to “Large” or “None”.
Volume
Press b / B to adjust the output level of the selected
speaker. (-10dB - 0dB)
Distance
If you connected speakers to your DVD Player, setting
the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the same time.
Press b / B to adjust the Distance of the selected
speaker.
[0.3m(1ft) - 6.0m(20ft)]
Test
Press b / B to test the signals of each speaker. Adjust
the volume to match the volume of test signals
memorized in the system.
Front Left (L) → Center → Front Right (R)
→ Rear Left (R) → Rear Right (L) → SubWoofer
You can adjust the volume during operating the test
tone, first use v / V to select Volume or Speaker
option then use b / B buttons to select volume or
speaker, so that all speaker’s volume is same from
the listener’s position.
During operating the test tone, if you adjust the
volume, it will be paused in the current speaker
channel.
AUDIO
Speaker
Volume
Distance
Test
Move Return
Select
Size
Front L
Large
0
dB
m(ft)
0.6(2)
Off
Enter