Filter
Top Products
2322
External Equipment Connection External Equipment Connection
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
Antenna connection
1. Connect RF out on the VCR to the Antenna input
on the rear of the TV.
2. Connect the antenna cable to the antenna in
jackon the VCR.
3. Press the TV/AV button to select Antenna input
source.
4. Press the PLAY button on the VCR.
SCART jack
1. Connect the Video outputs (Y Cb Cr) on a DVD
to the SCART on the TV.
2. Press the TV/AV button to select SCART mode.
3. Press the PLAY button on the DVD.
A/V INPUT
1. Connect the A/V out jacks on a VCR to A/V-IN
jacks on the TV.
2. Press the TV/AV button to select VIDEO mode.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the TV screen.
Note : If you have a mono VCR, connect the audio
cable from the VCR to the A/V-IN socket of the set.
S-VIDEO INPUT
If using an S-VIDEO source, the picture quality will be
improved over a video source.
1. Connect the S-VIDEO output of a VCR to the
S-VIDEO input on the TV.
2. Connect the audio cables from the S-VIDEO
VCR to the L (MONO) R inputs on the TV.
3. Select S-VIDEO mode by pressing the TV/AV
button repeatedly.
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Headphone jack
Insert the headphone plug to the headphone jack on
the TV. You can listen to the sound through the
headphone; no sound form the speaker on the TV.
To adjust the headphone volume, press the VOL
ÏÏqq
button. If you press the MUTE button, the sound from
the headphone is turned off.
VCR
S-VIDEO VCR
SCART S-VIDEO
A/V-IN
L(MONO) R
POWER SCART
COMPONENT
(DVD)
VCR
A/V-IN
L(MONO) R
SCART
Headphone