Filter
Top Products
25
Connecting PC as monitor
24
Connecting PC as monitor
Picture adjustment
You can adjust picture Contrast, Brightness,
Horizontal/Vertical position, Clock, Phase, Auto and Reset
as you prefer.
1. Press the TV/AV button to select the PC mode.
2. Press the MENU button.
3. Press the PR
xxyy
button to select the desired
picture item.
4. Press the VOL
ÏÏqq
button to make appropriate
adjustments.
Contrast
This function is to adjust picture to light/dark.
Brightness
This function is to adjust brightness of picture.
Temperature
Temperature is a measure of the warmth of the image color.
Horizontal Position/Vertical Position
This function is to adjust picture to left/right and up/down
as you prefer.
Clock
This function is to minimize any vertical bars or stripes
visible on the screen background. And the horizontal
screen size will also change.
Phase
This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
Auto
This function is for the automatic adjustment of the screen
position, clock and clock phase. The displayed image will
disappear for a few seconds while the Auto-configuration
is in process.
Note: Some signal from some graphics boards may not
function properly. If the results are unsatisfactory, adjust
your monitor’s position, clock and clock phase manually.
Reset
This function allows you to return to the good picture
reproduction programmed at the factory and cannot be
changed.
5. Press the TV/AV button to store the adjustment.
PC/DTV INPUT
1. Connect the PC IN cable (D sub jack)
from the monitor output socket of
the PC to the PC/DTV input socket
of the set.
2. Connect the PC Audio IN cable from
the PC to the PC Audio IN of the
set.
3. Press the TV/AV button to select PC
mode.
4. Switch on the PC, and the PC screen
appears on the set.
The set can be operated as the PC monitor.
Note : If you have an Apple Macintosh, connect the VGA desktop block from the 3
rows 15 pin to 2 row 15 pin with the signal cable and connect the XGA desktop block
to the Macintosh.
Resolution
Note:
a. If the set is cold, there may be a small “flicker” when the set is switched on. This is
normal, there is nothing wrong with the set.
b. Some dot defects may appear on the screen, like Red, Green or Blue spots.
However, this will have no impact or effect on the monitor performance.
SSM
CVOL VOLB
MENU
TEXT/MIX
UPDATE TIME REVEAL
SIZE SLEEP INDEX
TV/AV
I/II Q.VIEW
PSM
OK
PRW
PRV
POWER
▲▼ ◀▶ MENU%%TV/AV
Contrast
xx
0
ÏÏ
90
qq
100
yy
1024 X 768
AUTO
640X480
640X480
640X480
640X480
640X480
720X400
800X600
800X600
800X600
800X600
800X600
832X624
1024X768
1024X768
1024X768
1024X768
VGA
XGA
SVGA
(MAC)
31.5 KHz
35 KHz
37.9 KHz
37.5 KHz
43.5 KHz
31.5 KHz
35.2 KHz
37.9 KHz
48.1 KHz
46.9 KHz
53.7 KHz
49.7 KHz
48.4KHz
56.5 KHz
60.2 KHz
68.7 KHz
60 Hz
67 Hz
72 Hz
75 Hz
85 Hz
70 Hz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
75 Hz
60Hz
70 Hz
75 Hz
85 Hz
Mode Resolution
Horizontal
frequency (KHz)
Vertical
frequency (Hz)
Contrast
Brightness
Temperature
H-position
V-position
Clock
Phase
Auto
AUTO
Reset