Filter
Top Products
User Options
English
UNIDISK SC PLAYER
Owner’s Manual
Table of user options (continued)
Option Description Settings
x
Option Description Settings
PLAY COMMAND
STOP COMMAND
REPEAT COMMAND
HI-RES SACD/DVD-A
AUDIO
SCROLL SACD TEXT
PLAY ONLY
PLAY / PAUSE
STOP ONLY
STOP / EJECT
REPEAT ALL
REPEAT A-B / ALL
DIRECT
NORMAL
ONCE
LOOP
OFF
If you wish to use a handset other than the
one supplied with the unit, and the other
handset has separate play and pause keys,
set to PLAY ONLY.
If you wish to use a handset other than the
one supplied with the unit, and the other
handset has separate stop and eject keys,
set to STOP ONLY.
If you wish to use a handset other than the
one supplied with the unit, and the other
handset has only a repeat key, set to
REPEAT A-B / ALL. (If you select REPEAT
A-B / ALL a press and release of the repeat
key will act as a REPEAT A-B command and
a press and hold of the repeat key will act
as a REPEAT ALL command.
This option is for use if you have five full-
range speakers in your system plus a
subwoofer. When playing an SACD or DVD-
Audio and As Mix has been selected as the
audio mode, the DIRECT setting will bypass
the unit’s bass redirect circuitry, resulting in
higher audio quality.
ONCE: Track information on SACDs will
scroll once across the front panel display.
LOOP: Track information on SACDs will
scroll repeatedly across the front panel
display.
OFF: Track information on SACDs will not
appear on the front panel display.
*SCART for SCART version only.
31
PASS REMOTE IN TO OUT
(This option will not be
available if KNEKT MODE
has been set to AUTO,
MAIN or LOCAL.)
AUTO SOURCE SELECTION
(This option will not be
available if KNEKT MODE
has been set to SOURCE.)
SOURCE MEMORY
(This option will not be
available if KNEKT MODE
has been set to SOURCE.)
2 CHANNEL AUDIO
2 CHANNEL LFE
RS232 BAUD RATE
RS232 EVENTS
RS232 STARTUP MESSAGE
CD COMMANDS
ENABLED
DISABLED
(DISC) ENABLED
(DISC) DISABLED
ENABLED
DISABLED
PURE STEREO
SURROUND ENCODED
INCLUDED
EXCLUDED
9600
4800 to 230400
(9 settings)
ENABLED
DISABLED
ENABLED
DISABLED
ACCEPTED
IGNORED
If set to ENABLED, the unit passes RC5
commands received at REMOTE IN to REMOTE
OUT.
If set to ENABLED, pressing any disc key
( , etc) on the handset or front panel
will automatically put the unit into Disc
mode.
If set to ENABLED, the unit selects the last
used pre-amplifier settings for each source.
If set to DISABLED, the same pre-amplifier
settings are used for all sources.
Use this option to set whether the unit
outputs a two-channel (select PURE
STEREO) or a surround encoded multi-
channel signal (select SURROUND
ENCODED) through the KNEKT, SCART* and
TV OUT sockets.
Use this option to set whether the unit
includes (set to INCLUDED) or excludes
(set to EXCLUDED) the LFE (Low Frequency
Effects) signal in a two-channel downmix
that is being output through the KNEKT,
SCART* and TV OUT sockets.
Sets the baud rate for RS232 control.
If set to ENABLED, the unit passes
information regarding the internal status of
the unit to an external device that accepts
RS232 data.
If set to ENABLED, the unit will output an
RS232 start message when the unit is
switched on.
If an external CD player is connected to the
UNIDISK SC and you want the UNIDISK SC
to ignore CD handset commands, set to
IGNORED.