Filter
Top Products
Connecting
This chapter explains how to install the UNIDISK SC player into your hi-fi/AV system.
Note:
In this manual, ‘display device’ refers to plasma screens, projectors, projection TVs,
monitors, LCD TVs and televisions.
Unpacking
The UNIDISK SC is supplied with the following accessories:
●
luminescent handset with booklet
●
2 x RO3 (AAA) batteries for the handset
●
mains lead
●
1 pair of black interconnect cables
●
this manual
We recommend that you retain all packaging in case you need to transport the
UNIDISK SC at a later date.
Voltage selection
The UNIDISK SC contains an automatic internal mains voltage switch. This switch
operates on all worldwide mains voltages from 100V to 240V. Manual adjustment on the
product for setting the input mains voltage is not possible.
This unit must be earthed. Use the earthed mains lead supplied. Never use an
unearthed plug or adaptor.
Positioning
You can position your UNIDISK SC almost anywhere you find convenient, but please
consider the following points:
●
Allow at least 10cm of space to the sides, rear and above the UNIDISK SC for air
circulation.
●
You should have no problems operating the UNIDISK SC with the handset
wherever it is placed in a room, provided you keep your UNIDISK SC out of direct
sunlight.
Important:
Do not open the UNIDISK SC’s disc drawer if the unit is behind glass doors as this can
damage the drawer’s mechanism.
Connecting
UNIDISK SC PLAYER
Owner’s Manual
English
2