Loewe 32HD/DR+ Flat Panel Television User Manual


 
26
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Operating additional equipment
Rotating the TV set
(Only possible for Spheros 32/37 HD and
equipped with ”Motor Unit”).
If the screen is mounted on a "Motor Unit" you
can rotate it with the remote control to suit
your sitting position.
Launch the TV menu:
Press MENU on the remote
control.
Select the ”Rotate TV” bar.
You determine the direction of
rotation right, stop or left with
the arrows on the button.
Close the menu.
Note:
Do not place any objects in the range of
rotation of the TV set which could obstruct
rotation or be knocked over in the process.
Before activating the rotary function, make sure
that the set can rotate freely and unhindered.
Viewing angle, range of
rotation
Setting the rotation area (a maximum of
+/- 40 degrees)
With this menu, you can determine the
maximum rotation to the left and right.
Press MENU on the remote
control.
Highlight the ”Settings” bar.
Press OK, then to ”other...”
Highlight the ”Rotate TV” bar,
press OK.
Select line "Basic adjustment".
Press the OK button.
You set the desired maximum
range of rotation to the right
by pressing the ring (right).
Rotation stops when you
release the ring.
The setting is saved by pressing
OK .
Then set the desired maximum
rotation to the left by pressing
the ring (left).
Confirm with OK.
Press END to exit the menu.
Determining the switch off position
Here you determine the position of the screen
(TV set) which is adopted when switching off
providing you have activated this function.
Press MENU on the remote
control.
Highlight the ”Settings” bar.
Press OK, then to ”other...”
Highlight the ”Rotate TV” bar,
press OK.
The menu "Rotate TV“
appears. Select
Define "Switch-off position".
You set the desired switch off
position to the right or left by
pressing the ring.
Rotation stops when you
release the button.
Save the "set switch-off
position“ with OK.
31963_021_RC3_GB 14.01.2005, 10:40 Uhr26