Filter
Top Products
30
120-240V
50/60Hz
SERVICE
IR-
Link
SYSTEM
ANT-1
ANT-2
PIP
UHF/VHF
AUDIO
IN 2
Y
IN1
AUDIO IN1
L R
AV 2 ( RGB )
Center Sub
L R
SOURROUND
DVI-INPUT
D-SUB
DVI-OUTPUT
CONTROL
RC5/
RC6
VGA
DISPLAY
DIGITAL
L R
AUDIO IN 3
L R
AUDIO OUT
CR/PR
CB/PB
IN2 OUT
AV 1
ON
Line IN
Power OUT
OFF
Bass Intensity
Center to
System connector
230V~50/60Hz
Surr.
Front
Right
Surr.
Front
Subw.
Left
Right
Center
Left
Slave
Master
R
R
L
C
L
Phase
Min. Max.
TV
Sat
0 180
PREOUT
FR
FL
SL SR SUB
C
TO TV
TV
EXT
12V/15mA
L-Link
AM GND FM (75 Ω)
LL
RR
AUX1 IN
DIGITAL
IN
DIGITAL
OUT
AUX OUT AUX 2
Connecting the DVD Preceiver Auro 8116 DT and Tremo
Connecting the Loewe DVD Preceiver Auro
8116 DT to the Signal Box Spheros 32/37
HD or Xelos SL 32/37 HD
When you use the Loewe DVD Preceiver in
connection with a Loewe TV set, connect the
Tremo loudspeaker system to the audio outputs
of the DVD Preceiver.
Connect the cubic socket on the DVD Preceiver
to the ”Master” cubic socket on the Tremo
subwoofer. Use the cubic plug cable enclosed
with the DVD Preceiver Auro (2-wire cable).
Plug the white plug (without kink protection) in
the cubic socket on the subwoofer.
If the loudspeakers of the Loewe TV set are
used for center reproduction, connect the cubic
socket of the TV set to the ”Slave” cubic socket
on the subwoofer with the cubic plug cable.
Use the cubic plug cable enclosed with the
Tremo loudspeaker system. Plug the white plug
(without kink protection) into the cubic socket
on the subwoofer. Set the switch ”Center to”
on the subwoofer to ”TV”.
If on the other hand you want to use the
external center loudspeaker, do not connect
Slave to the TV.
Set the ”Center to” switch on the subwoofer to
”Sat”.
Connect the TV set (Euro AV socket 2) and the
DVD Preceiver with the Euro-AV cable.
Connect the TV set (Service socket) to the TV-L-
Link socket of the DVD Preceiver with the L-
Link cable (delivered with the DVD Preceiver) .
This ensures that the Tremo loudspeaker system
is switched on during radio or CD playback
from the DVD Preceiver but the TV remains
switched off.
Connect the digital output of the TV set with
the DIGITAL IN input of the Auro system with a
cinch cable. This ensures that the digital audio
signal for decoding is fed into the DVD
Preceiver.
See the ”Tremo” operating manual to find out
how to connect the satellite loudspeaker.
Settings on the DVD Preceiver Auro
8116DT
Select the ”Tremo” loudspeaker system in the
DVD menu under Settings, set the Listener/
Speaker distances and level the speakers. Also
have a look at the DVD Preceiver manual
(pages 12 and 13).
31963_021_RC3_GB 14.01.2005, 10:40 Uhr30