Filter
Top Products
17
Modes of operation
Pause (PAUSE)
Next chapter (only for DVD)
Previous chapter (only for DVD)
Record
Perform selected function.
When you start a recording, the program you
have just selected is recorded. You cannot switch
over to another channel, it is locked. You can only
switch over when the recording has fi nished.
Exceptions:
1. You have installed several tuners (not PIP tun-
ers) in the TV set, then you can watch another
channel with the second tuner.
2. You can also watch the signal via an AV con-
nection (e.g. DVD player or a second VCR).
3. In a VCR with Digital Link Plus the VCR tuner
is used for the recording (not for satellite
programs).
Video menu
Show the Video menu
●
▼
▼
❚❚
You can change and delete timer data or program
new recordings in the ”Timer” menu.
The ”Record” menu gives you the option for timer
programming by EPG, teletext or manually.
In the ”Connections” menu you can log other
AV equipment on or off. In the ”Digital Link Plus
transfer” menu the station data of the TV set (not
satellite stations) are transmitted to the Digital
Link Plus VCR.
In the Settings menu you can enter the record lead
and follow on time and serial recording tolerance.
Digital Link Plus VCRs have the possibility for
transferring the station data from the TV set to
the VCR via the Euro-AV cable (not for satellite sta-
tions). Every time you change the station memory
of the TV, you are asked whether you want to
make a data transfer.
The receiver unit of the VCR is always used for
recording with a Digital Link Plus video recorder
(not satellite stations) and the tuner of the TV set
is available for watching TV.
The receiver unit of the VCR is always used for
recording with a Digital Link Plus video recorder
(not satellite stations) and the tuner of the TV set
is available for watching TV.
Loewe VCRs also have Digital Link, a system for
controlling Loewe VCRs via the Euro-AV cable. If
the Loewe VCR only has Digital Link, the TV tuner
is used for recording. If you have installed your
Loewe VCR in a concealed place, you can operate
the Loewe VCR with the remote control. Operation
with the control bar also works with Digital Link.
Digital Link must be switched on on the video
recorder.
Only use fully wired Euro-AV cables, otherwise
Digital Link or Digital Link Plus will not work.
MENU
Video mode
You can operate Loewe video recorders and DVD
players with the video control bars even if they
are hidden. The VCR’s must be connected to the
Euro AV sockets (Scart) and logged in under the
”Connections” menu.
Digital Link must be switched on on the Loewe
video recorder. Only then can you use the control
bar. You also need Digital Link for timer recordings
of satellite programs controlled by the TV set.
You can display up to two control bars but they
are only displayed by logged in VCR’s and DVD
players.
Show/hide video
control bar
Select the video control bar if e.g.
several VCR’s or a DVD player
and a VCR are connected.
Select function
Switch VCR/DVD on/off
Select video input (Euro-AV
socket) for the VCR
Rewind (only for VCR) or Scan in
rewind
Stop (STOP)
Playback (PLAY)
Fast forward (only for VCR) or
Scan in fast forward
OK
Video menu
Connections
Settings
Back
Info
End
Recording
Timer
OK
INFO
MENU
END
■
▼
OK
OK
AUX
▼
▼
STOP
▼
▼
▼
▼
▼
❚❚
■
AUX
VCR STOP
▼
▼
▼
▼
▼
●
❚❚
■
Menu
Info
End
DVD
▼
▼
OK
INFO
MENU
END
▼
▼
The Video menu provides you with the following
options:
32190_021_3_GB 17 18.10.2004, 15:40:09 Uhr