Filter
Top Products
9
Initial installation
Remote control
Batteries
To insert or change the batteries, press the point
marked by an embossed arrow. Push the cover of
the battery compartment down and remove it. In-
sert the batteries of the alkaline manganese type
LR 03 (AAA) with the correct polarity (+/–).
Then push the cover back on.
Note on disposal of batteries:
The original batteries do not
contain any pollutants such as
cadmium, lead and mercury.
Used batteries do not belong in
the domestic waste. They must
be taken to the appropriate col-
lection points according to the
national laws.
Setting the remote control to operate the
TV set
Press the TV button
How to operate other Loewe equipment is de-
scribed on page 20.
Connection
Mains
Connect the TV set to a 230V/50–60 Hertz outlet.
Antennas
Connect your antenna or cable system to the VHF/
UHF antenna socket.
If equipped with a PIP tuner, plug the antenna plug
which comes out above the PIP antenna socket
into the antenna socket of the VHF/UHF tuner. Plug
the antenna plug of your antenna or cable system
into the PIP tuner socket.
If equipped with a DVB-T module 2 T -CI or
2 S/T-CI, connect your antenna system to the upper
socket of the DVB-T module (IN) and connect the
lower socket (OUT) to the antenna input of the
VHF/UHF tuner or if equipped with a PIP tuner, to
this socket.
If equipped with the terrestrial digital tuner 2
T-Basic a common antenna is used for digital and
analog signals, connect the terrestrial digital tuner
and the analog tuner to the antenna system via an
antenna splitter.
If equipped with one or two satellite tuners, con-
nect the Sat antennae to the SAT sockets (see fi g.
page 5).
Switching on
Press the On/Off button so that
it snaps in.
Initial installation
Automatic programming of the TV set is started
the fi rst time you switch it on. Follow the menus.
First you have to select the menu language for
your set. Then you specify which antenna you
have connected to your TV and in what country
you are using it. Then you start the station
search. The TV set searches for, stores and sorts
all the stations which your antenna system re-
ceives. You then see a list of the stored stations
in which you can mark your favorites. Finally log
in your video recorders, decoders, Loewe audio
system and Home Automation with the con-
nection wizard and connect these to the TV set
according to the illustrated connection plan.
Pressing the OK button in the
direction of the arrow to select
the settings
... confi rm the settings with OK.
You then move on to the next
menu ...
... press this button if you want
information about the settings.
You can repeat initial installation at any time,
e.g. after moving house. Call the index in the
main information (info button). Then select the
item ”Repeat initial installation”. Then start
”Initial installation” with OK.
+
+
INFO
OK
OK
TV
AV2/RGB
AV1
SAT
SERVICE
AUDIO OUT
VHF/UHF
R
L
SUBWOOFER
STAND
IN
OUT
VHF/UHF
32190_021_3_GB 9 18.10.2004, 15:39:53 Uhr