Filter
Top Products
21 -
Daily operation
Adjusting the picture
Call TV menu.
34 Select Picture,
6go to the menu line below.
34Select the desired picture function,
6 go to the menu line below.
34 Make changes.
Explanations of the picture settings:
Switches the picture parameters between standard and
personal values.
Adjust contrast.
Adjust the colour.
Set warmer or cooler tints for the picture.
Adjust the brightness of the picture.
Adjust the contour sharpness of the picture.
Removes or reduces the signal noise in the picture.
Call with OK.
Picture improvement on/off and demo mode for Image
+
.
Set picture format (see page 22).
Move picture vertically (see page 22).
Automatic detection and setting of the picture format
for Cinemascope or widescreen movies.
Reduce jolting.
The TV picture adapts to the ambient brightness. The
power consumption of the TV set is also reduced.
Standard values / personal values for picture adjustment
Call TV menu.
34 Select Picture,
6go to the menu line below.
34 Select Picture adjustment,
6 go to the menu line below.
34 Select desired values for picture,
OK call selected values for picture.
Explanations for picture adjustment:
Custom adjustments of contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise supression are saved in the per-
sonal values. There are separate personal values for every signal source
(TV analogue, TV digital, HD analogue, HD digital, PC, PhotoViewer).
By selecting Standard values the picture parameters are reset to factory
values for the respective currently active signal source.
For an explanation of the signal source, see glossary: Signal input
groups.
In the index of the TV set, all the picture and sound adjustments can be
reset to the factory values for all signal sources in one step under Reset
picture/sound or Factory settings picture/sound.
Operation without remote control
Changing the station on the TV set
+ / – Station up/down.
Switching radio on or off or switching to radio
R Radio on or switching between TV and radio.
Calling the TV menu on the set
M call Direct control on TV set menu,
– / + select function.
➠ Service is for customer service personnel only.
M or R Go to the menu line below,
– / + make changes.
M Move up one menu line,
– / + select other function.
Brightness
Volume
Direct control on TV set
19
Contrast Picture format StationAV selection
END
INFO
Sound
Connections
Recording SettingsPicture
TV menu
Picture adjustment ...
Picture
Here you can adjust among other things: Contrast, colour, brightness, picture
adjustment, sharpness, picture format.
END
INFO
Contrast
Colour temperature
Colour intensity
Picture adjustment
Picture (standard values, TV digital)
TV menu
Picture adjustment
Here, you can switch between the preset standard values for contrast, colour
intensity, colour temperature, brightness, focus and digital noise reduction
and your own personal values. Each of the signal input groups „TV analogue“,
„TV digital“, „HD analogue“, „HD digital“, „PC“ and „PhotoViewer“ has its own
values. Refer to printed operating manual.
Standard values (TV digital) ...
END
INFO
OK
Picture adjustment
Picture (personal values, TV digital)
TV menu
Standard values (TV digital)
Personal values (TV digital)
Picture
adjustment
Contrast
Colour intensity
Colour
temperature
Brightness
Sharpness
DNC
more ...
Image
+
Picture format
Move picture
up/down
Auto format
DMM
Automatic
dimmer