LOREX Technology L15LD420 DVR User Manual


 
31
Record Setup
Record Setup
[RECORD SETUP]
Set up the recording picture quality.
[SCHEDULE SETUP]
Program the recording schedule.
Record Setup - Record Configuration
[QUALITY]
Set up the recording picture quality
Quality level: Normal / High / Highest.
Data size of image in PAL system is a little bigger than
NTSC system, but the total recording time is same as
NTSC system.
NOTE: The Data size of the image in the PAL system is larger than the NTSC system. The
total recording time is the same between the PAL and NTSC systems. To transmit more
images via the network (and to set a longer recording time) set the Quality to “LOW” or “Mid”
and recording at 352×240(360×288).
[FRAME RATE]
Adjust recording frame rate.
[PRE ALARM RECORD]
Displays the amount of time included from the Pre Recording (in sec).
[HDD REMAINING]
Indicates HDD capacity remains by size (GB). / Indicates total HDD capacity (GB).
[REMAIN TIME]
Indicates HDD capacity remains by time.
(D- days, H- hours, M- Minutes.