Filter
Top Products
51
SATA Hard Drive Replacement - Appendix #6
SATA Hard Drive Replacement - Appendix #6
The Hard Drive serves the same purpose in an Observation System as a video cassette does in
a VCR. Please follow the steps carefully in order to ensure proper installation.
The compartment located on the side panel of the DVR is the removable Cartridge Casing in
which you insert the Hard Drive. The various parts of the Cartridge Casing are labeled for your
reference.
STEP 1: Remove the Cartridge Casing from the DVR.
• If the door does not open you may need to unlock the cabinet. Please refer to Step 7on how
to unlock the cabinet.
STEP 2: Remove the Cover from the Cartridge Casing
• Un-clip the release latch with the word “OPEN” printed beside it by gently pushing on the latch.
• Slide the cover off to where it locks or catches the stopper and lift the Cartridge Casing to
remove it.
STEP 3: Slide the SATA Hard Drive into the Cartridge Casing
• Slide the SATA HDD into the Cartridge Casing with the SATA HDD connectors facing the
rear of the Cartridge Casing.
Release Latch
Slide Cover Off
• Lift the handle and the door should open.