Filter
Top Products
13
Basic Operations
Function
The function only works for discs having
scenes recorded at different angles.
Press
ANGLE during playback. Each time
the button is pressed, the number of the
angle changes in sequential order.
Program Play
(Only available on certain types of discs)
When disc play is stopped:
1. Push the
PROGRAM button to displayed
the programming screen.
2. Use the
NUMBER buttons to enter the
desired chapter or track.
Example: To play Track 5, then Track 3,
and finally Track 16. Push 3, 5, 10+ 6 in
that order.
3. Use the
SELECTION buttons
to select "Start" and then press
ENTER
to start Program Play.
Note: When the symbol is displayed,
this signifies an invalid operation that is
not accepted by the DVD player.
Repeat Play
While a disc is playing, continue pushing
REPEAT to select from three repeat modes.
For DVD discs:
Push
REPEAT to repeat Chapter.
Push
REPEAT again to repeat Title.
Push
REPEAT again to repeat All.
Push
REPEAT once more to Exit.
For CD discs:
Push
REPEAT to repeat Track.
Push
REPEAT again to repeat All.
Push
REPEAT once more to Exit.
Zoom
While playing a disc, press the ZOOM but-
ton to increase or decrease the screen
image. There are magnification levels:
three levels of increased magnification X2,
X3, X4 and three levels of decreased mag-
nification 1/2, 1/3, 1/4. Zoom toggles
through each of the six magnification lev-
els, then returns to normal size on the sev-
enth press of the button.
MV-DVD-PL2-UM.qxp 2/10/06 15:13 Page 13