Filter
Top Products
18
Press digital keys on the remote control; enter the password to go into V-CHIP control menu
(Default pass code for V-Chip: 0711 and should press twice time)
If your password is error, then the screen will display “PIN ERROR”.
5. After enter the V-CHIP menu, press ġ or Ģ key to select, if you want to set V_CHIP, you need to set the
“Status” on the condition of “ON”.
1) Press ġ or Ģ key to select “Status’’ option
2) Press
> or < key to select “ON’’ or “OFF”
6. TV Guidelines Setting
1) Press
ġ or Ģ key to select “TV Guidelines” option
2) Press
> or < key to enter “TV Guidelines” menu
3) Press
ġ or Ģ key to select block item.
4) Press > or < key to select U or B, selecting U means “Unlock”, selecting B means “Block”.
5) If the setting is OK, press “MENU” key to exit TV Guidelines menu.
Enfocus Software - Customer Support