Magnavox 26MD301B Flat Panel Television User Manual


 
14
Connection to Cable Receiver or
Satellite Box
Use an HDMI or Component Video cables to connect the
HDMI or the Component Video Input jacks of the unit to the
HDMI or the Component Video output jacks of the cable
receiver / satellite box.
If you connect to the unit’s Component Video Input jacks,
connect Analog Audio cables to the Analog Audio L/R Input
jacks for the Component Video connector jacks.
32”
STEREO
PCM
COMPONENT VIDEO OUT
Pr/CrPb/CbY
AUDIO OUT
RL
ANT IN
HDMI OUT
(red)
(red)
(blue)
(blue)
(green)
(green)
cable receiver /
cable receiver /
satellite box
satellite box
cable TV signal
cable TV signal
including PPV
including PPV
component video cables
component video cables
(red / blue / green) and audio cables
(red / blue / green) and audio cables
RF coaxial cable
RF coaxial cable
or
or
or
HDMI cable
HDMI cable
satellite dish
satellite dish
STEREO
PCM
ANT IN
26”
or
RF coaxial cable
RF coaxial cable
(red)
(red)
(blue)
(blue)
(green)
(green)
(red)
(red)
(blue)
(blue)
(green)
(green)
cable receiver /
cable receiver /
satellite box
satellite box
cable TV signal
cable TV signal
including PPV
including PPV
component video cables
component video cables
(red / blue / green) and audio cables
(red / blue / green) and audio cables
component video
component video
cables (red / blue / green)
cables (red / blue / green)
and audio cables
and audio cables
or
or
HDMI cable
HDMI cable
HDMI cable
HDMI cable
satellite dish
satellite dish
22”/19”
You can also connect this unit to the cable receiver or satellite
box other than the HDMI or the Component Video output jacks
or Composite Video output jack (
p. 37, 38) because they
might have different output jacks.
Required cables and connecting methods of the cable receiver /
satellite box, or the availability channel for the clear QAM may
differ depending on the cable / satellite provider or local TV
broadcaster.
For more information, please contact your cable / satellite provider
or local TV broadcaster.
Note
Use an HDMI cable with the HDMI logo (a certi ed HDMI cable).
High Speed HDMI cable is recommended for the better
compatibility.
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC
outlet after all the necessary connections are made.
Caution:
Do not connect the AC power cord to a power supply outside
the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this
range may result in re or electrical shocks.
Note
Each time you plug in the AC power cord, no operations will be
performed for a few seconds. This is not a malfunction.