28
S
martLock™ offers the viewer other blocking
features as well. With these Blocking Options,
the censoring can be turned ON or OFF.
1
Press the MENU button on the
remote to show the on-screen menu.
2
Press the CURSOR UP ▲ or
DOWN ▼ button until the word
FEATURES is highlighted.
3
Press the CURSOR RIGHT ᮣ
button to display the FEATURES
menu options.
4
Press the CURSOR UP ▲ or
DOWN ▼ button until the words
SmartLock (AutoLock) are highlighted.
5
Press the CURSOR RIGHT ᮣ
button.
6
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. SmartLock
menu options will be displayed.
7
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the words
BLOCKING OPTIONS are high-
lighted.
8
Press the CURSOR RIGHT ᮣ
button to display the Blocking
Options (BLOCKING, UNRAT-
ED, or NO RATING) menu.
9
Press the CURSOR UP ▲ or
DOWN ▼ buttons to highlight the
desired feature.
When highlighted, each feature can be
turned ON or OFF using the CUR-
SOR RIGHT ᮣ or LEFT ᮤ but-
tons on the remote.
OTHER SMARTLOCK™ BLOCKING OPTIONS
More...
10
BLOCKING OPTIONS:
BLOCKING: This is what might be called the “master switch” for SmartLock™. When in the ON position, ALL blocking/censoring
will take place. When in the OFF position, ALL blocking is disabled.
UNRATED: ALL unrated programs based on the Movie Ratings or Parental (TV) Guidelines can be blocked if this feature is set to
ON and the BLOCKING feature is set to OFF.
NO RATING: ALL programming with NO content advisory data can be blocked if this feature is set to ON and the BLOCKING
feature is set to OFF.
NOTE: Remember, if you ever for-
get your Access Code, the 0,7,1,1
access code is the default code or a
way to reset the code when the
current access code is not known.
Some models refer to SmartLock as
AutoLock, your TV may show AutoLock
instead of SmartLock in the on-screen
menu. These features are the same.
