Magnavox 27MS4504R CRT Television User Manual


 
USING THE S-VIDEO INPUT JACKS
5
T
he S(uper)-Video connection on the
rear of the TV can provide you with
better picture detail and clarity for the
playback of accessory sources such as DBS
(digital broadcast satellite), DVD (digital
video discs), video games, and S-VHS VCR
(video cassette recorder) tapes than the
normal antenna picture connections.
NOTE: The accessory device must have
an S-VIDEO OUT(put) jack in order for
you to complete the connection on this
page.
1
Connect one end of the S-
VIDEO CABLE to the S-VIDEO
jack on the back of the TV. Then
connect one end the AUDIO (red
and white) CABLES to the AV2 in
AUDIO L and R (left and right)
jacks on the rear of the TV.
2
Connect other end of the
S-VIDEO CABLE to the
S-VIDEO OUT jack on the back of
the VCR. Then connect the other
ends of the AUDIO (red and
white) CABLES to the AUDIO
(left and right) OUT jacks on the
rear of the VCR.
3
Turn the VCR and the TV
ON.
4
Press the CH + or CH- buttons
to set the TV to its SVHS2
channel. (Go to your lowest chan-
nel, for example channel 1, then
change channels down to find the
correct source channel.)
5
Now your ready to place a prere-
corded video tape in the VCR and
press the PLAY button
.
The S-VIDEO and VIDEO AV2 in(puts) are in
parallel. The S-VIDEO input is dominant when
in use. If separate video signals are connected
to the S-VIDEO and VIDEO AV2 in(puts), the
signal from the VIDEO AV2 in(puts) will not be
usable.
HELPFUL HINT
L/Mono
Monitor out
VIDEO
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
COMPONENT VIDEO INPUT
AUDIO OUT
L R
S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
1
2
1
2
3
5
123
POWER
CH
CH
VOL
VOL
STATUS
EXIT
SLEEP
MUTE
SMART
PICTURE SOUND
SURF
A/CH
45
6
789
0
CC
MENU
MAGNAVOX
4
Audio Cable
(Red and White)
VCR (Equipped with
S-Video Jacks)
S-Video Cable
Back of VCR
Back of TV