Filter
Top Products
DVD FUNCTIONS
–
16
–
EN
1
Press [MODE] once.
2
Using [K / L] to select desired
track. Press [OK].
• Up to 99 tracks can be programmed.
• If eight or more tracks were in a program, use
[PREV H], [NEXT G] to see all the tracks.
• While a JPEG folder is open:
– Press [B] when you want to go to the next hierarchy.
– Press [s] when you want to go back to the previous
hierarchy (except for the top hierarchy).
3
Press [PLAY B] to start programmed playback.
1
Press [MODE] twice.
2
Press [PLAY B] to start random playback.
1
Press [A-B REPEAT] at your desired starting point (A).
2
Press [A-B REPEAT] at your desired ending point (B).
• Point B should be in the same title or track as point A.
1
Press [REPEAT] during playback.
Repeat / Random / Programmed Playback
A-
A-B
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
RANDOM
CD-DA TOTAL 0:00:00
OK
CD-DA TOTAL 1:03:30
2/3
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
OK
Note:
• Repeat setting (except “ALL”) will be cleared when moving to
another title, chapter, track/file or folder.
• This function is not available with some discs or during repeat
A-B playback.
• Repeat playback is not available when you play back the video
CD with PBC function.
Note:
• Press [CLEAR] at step 2 to erase the most recently entered track.
• To erase all programmed tracks at once, select “ALL CLEAR’’
and press [OK] at step 2.
• While a program is being played back, [STOP C] works as
follows;
- Press [STOP C] and [PLAY B] next, so that the
programmed playback restarts. (CD playback restarts
from the current point. JPEG playback restarts from the
beginning of the current file.)
- Press [STOP C] twice and [PLAY B] next, so that playback
restarts from the first track in the original order. However,
your programmed playback can be restarted when you
follow the above steps. (Your programs are still stored until
either the disc tray is open or power is turned off.)
• To repeat the current track in the program, press [REPEAT]
repeatedly until
“
TRACK’’
appears during playback.
• To repeat the entire program, press [REPEAT] repeatedly until
“
ALL’’ appears during playback.
Note:
• To repeat the current track in the random mode, press [REPEAT]
repeatedly until “
TRACK” appears during playback.
• To repeat the entire random selections, press [REPEAT] repeatedly
until “
ALL” appears during playback.
• During random playback, you cannot go back to the previous track.
REPEAT
A-B
PLAY
Note:
• To exit the sequence, press [A-B REPEAT] so that “OFF”
appears.
• To cancel point A, press [CLEAR] at step 1.
• This function is not available in the other repeat modes.
PLAY
REPEAT
PLAY
Repeat Playback
Repeat function is available only during playback.
Programmed Playback
You may determine the order in which tracks will play back.
Random Playback
This function shuffles the playing order of tracks instead of
playback in sequence.
Repeat A-B Playback
Repeat function is available only during playback.
OFF
CHAPTER
TITLE
Each time you press [REPEAT], repeat function changes as
example below.
OFF
TRACK
ALL
(repeat off)
(current chapter repeat)
(current title repeat)
(repeat off)
(current track repeat)
(entire disc repeat)
e.g.) DVD
OFF (repeat off)
TRACK (current file repeat)
GROUP (current folder repeat)
ALL (entire disc repeat)
e.g.) CD
REPEAT
A-B
PLAY
MODE
MODE
or
OK
STOP
e.g.) CD
STOP
E6E73UD_BDP170MW8.indd 16E6E73UD_BDP170MW8.indd 16 2007/07/17 17:39:562007/07/17 17:39:56