Filter
Top Products
44 EN44 EN
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
1
Turn on the TV and press
[STANDBY-ON
y
y], and be sure to
select the input of the TV to which
the unit is connected.
2
When you want to record to the disc:
Press [DVD].
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
It takes a while to load
the disc.
When you want to record to a
cassette tape:
Press [VCR].
Insert the cassette tape with a erase-
protection tab into the cassette
compartment.
3
Select the input of the unit which the
external device is connected. (E1 or E2)
• To use the input jacks on the rear of this unit;
Select “E1 (Rear)” position by using [SOURCE]
or [CHANNEL
/ ].
• To use the input jacks on the front of this unit;
Select “E2 (Front)” position by using [SOURCE]
or [CHANNEL
/ ].
• You can also select external input position by
using [the Number buttons].
e.g.) For E1, press [0], [0], [1].
4
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 33 for DVD
or “Recording” on page 87 for VCR.
5
Press [RECORD I] (DVD or VCR) on
the unit to start recording.
6
Start playback on the external device
to record from.
7
For disc:
Press [STOP C] on the unit to stop
recording.
For cassette tape:
Press [STOP C/EJECT A] on the unit
to stop recording.
This operation may take a
while to be completed.
Before recording from an external device, refer to the
instructions for the connection on page 43.
STANDBY-ON
DTV/TV
ABC DEF.@/:
JKL MNOGHI
TUV WXYZ
SPACE CLEAR
SETUPDISC MENU
RETURNTITLE
CHANNEL
TIMERREC MODE
AUDIOREC
RAPID PLAYCM SKIP
PQRS
SOURCE
123
456
78
.
0
OK
+--
o
p
B
B
iji
C
F
gh
s
9
DISPLAY OPEN/CLOSE
I
A
VCR DVD
D.DUBBING
TIMER
SET
SEARCH
STANDBY-ON
SOURCE OPEN/CLOSE
A
ABC DEF.@/:
JKL MNOGHI
TUV WXYZ
SPACE
PQRS
123
456
78
0
9
CHANNEL
+--
REC MODE DVDVCR
2
17
7
5
5
E9C80UD.indd 44E9C80UD.indd 44 2006/12/19 14:03:172006/12/19 14:03:17