Filter
Top Products
48 EN48 EN
DUBBING MODE
1
Press [SETUP].
2
Use [K / L] to select “Recording”,
then press [OK].
“Recording” menu will appear.
3
Use [K / L] to select “Dubbing
Mode”, then press [OK].
Selection menu will appear.
You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This function will be possible only if the
DVD or the cassette tape is not copy protected.
Before starting this function, prepare for the recording on the
DVD+RW/+R, DVD-RW/-R or the cassette tape. Refer to pages
35 and 87.
Make sure:
• Insert a recordable disc and a cassette tape with a erase-
protection tab.
Note for recording to a cassette tape:
• The cassette tape's erase-protection tab is intact.
• The remaining time of the cassette tape is long enough.
Note for recording to a disc:
• Make sure that the disc is recordable. Refer to page 33.
Note for VCR to DVD duplication
• After starting VCR to DVD duplication, the picture
may be distorted because of the auto tracking
function.
This is not a malfunction. Be advised to playback the
cassette tape until the picture is stabilized, then set
the starting point which you wish to start recording,
and start VCR to DVD duplication.
STANDBY-ON
DTV/TV
ABC DEF.@/:
JKL MNOGHI
TUV WXYZ
SPACE CLEAR
SETUPDISC MENU
RETURNTITLE
CHANNEL
TIMERREC MODE
AUDIOREC
RAPID PLAYCM SKIP
PQRS
SOURCE
123
456
78
.
0
OK
+--
o
p
B
B
iji
C
F
gh
s
9
DISPLAY OPEN/CLOSE
I
A
VCR DVD
D.DUBBING
TIMER
SET
SEARCH
SETUP
p
o
OK
B
F
C
REC MODE
D.DUBBING
DVDVCR
E9C80UD.indd 48E9C80UD.indd 48 2006/12/19 14:03:192006/12/19 14:03:19