26
EN
O
PERATING DVD
Time Search
Time Search
1
During playback, press [MODE] repeatedly until
“ “ or “ “ appears.
e.g.) DVD
/12 (SEARCH)
2
Use [Cursor K / L] repeatedly until “ “ appears.
or
1:29:00
TOTAL
3
Press [the Number buttons] to select your desired
time lapse within 60 seconds.
1:29:00
TOTAL
4
Playback will start automatically from the time you
selected.
Note:
• When there is no need to enter a number, “0” appears
automatically. For example, “0: 0_ : __” appears in time
search menu if the total time of the title or track is less than 10
minutes.
• Press [CLEAR] to erase the incorrect input at step 3.
• Time search can only be performed during playback or
when the unit has kept the resume information. It cannot be
performed in the stop mode.
Repeat Playback
You can repeat playback chapters, titles or tracks on a disc.
1
During playback, press [MODE] repeatedly until
“
“ appears.
OFF (REPEAT)
2
Press [Cursor K / L] to change the repeat mode.
DVD
OFF (repeat off)
CHAPTER (current chapter repeat)
TITLE (current title repeat)
CD
OFF (repeat off)
TRACK (current track repeat)
ALL (entire disc repeat)
3
Press [RETURN] to exit.
Repeat A-B Playback
You can repeat playback between A and B on a disc.
1
During playback, press [MODE] repeatedly until
“
AB
OFF“ appears.
AB
OFF (A-B REPEAT)
2
Press [ENTER] at your desired starting point A.
A- (A-B REPEAT)
AB
3
Press [ENTER] at your desired ending point B.
A-B (A-B REPEAT)
AB
• Point B should be in the same title or track as point A.
• Within a few seconds, the section A-B will begin to
play back repeatedly.
4
To cancel repeat A-B playback, press [MODE] repeat-
edly until “
AB
A-B“ appears.
Press [ENTER] so “
AB
OFF” appears.
5
5
P7401UM_CD130MW8.indd 26 2007/04/23 9:38:33