Magnavox CD130MW8 TV DVD Combo User Manual


 
31
EN
WATCHING TV
OPTIONAL SETTING
OPERATING DVD
INTRODUCTION
CONNECTION
INITIAL SETTING DVD SETTING INFORMATION
TROUBLESHOOTING
ESPAÑOL
Marker Setup
Marker Setup
This feature allows you to assign a speci c point on a disc to be called back
later.
To set a marker
1
During playback, press [MODE] repeatedly until
” or “ ” appears.
e.g.) DVD
/12 (SEARCH)
2
Use [Cursor
K
/
L
] repeatedly until maker search menu
appears.
e.g.) DVD
or
3
Use [Cursor s / B] to select an available marker
within 60 seconds.
e.g.) DVD
or
4
When the playback reaches the point at which you
want to set a marker, press [ENTER].
• Marker is now set.
e.g.) DVD
5
Press [RETURN] to exit.
To return to the marker later
1
To select a desired marker, repeat steps 1 to 3 in
“To set a marker“.
e.g.) DVD
2
Press [ENTER] at the desired marker to start playback
from the specific point which you set.
e.g.) DVD
Note:
• Marker search menu will disappear in about 60 seconds
when there is no input.
• You can mark up to 10 points.
• To clear a marker, select the marker to be cleared, and then
press [CLEAR].
• Ejecting the disc or turning off the power will erase all mark-
ers.
Selecting
” at step 3 in the section “To set a marker”
will also erase all markers.
P7401UM_CD130MW8.indd 31 2007/04/23 9:38:42