Magnavox MC19D1MG TV VCR Combo User Manual


 
4
For a one-time recording, press PLAY/until the
desired date appears.
Or, to record a TV program at the same time on
the same channel every day, press STOP/ until
EVRY DAY appears.
Or, to record a TV program at the same time on
the same channel every week, for example every
Monday, press STOP/ until EVRY and your
desired day of the week appear together.
Finally, press F.FWD/B.
TIMER PROGRAMMING
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B 61 7/05 FRI -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
26 Timer Recording
Follow the steps below to program the TV/VCR to record TV pro-
grams while youre away from home. The TV/VCR will turn itself
on, record, and turn itself off automatically.
Before you begin, make sure ...
The clock is set. If the clock is not set, MANUAL CLOCK SET
appears. See page 14 to set the clock, then set the recording.
Channels are set. Details are on pages eight and 10.
A tape is in the TV/VCR.
1
Press MENU. Press PLAY/or STOP/ to select
TIMER PROGRAMMING. Press F.FWD/B.
2
Press PLAY/or STOP/ to select a program posi-
tion. Then, press F.FWD/B.
3
Press PLAY/or STOP/ until the desired channel
number appears. (Example: CH61) Then press
F.FWD/B. If the TV/VCR is connected to a Cable Box or
Satellite Box, the TV/VCR must be on CH3 or CH4. Set CH
as 03 or 04 in the Timer Programming menu. Select the
channel to be recorded on the Cable Box/Satellite Box.
• If you are using Timer recording,
you may not operate the unit
manually.
• The erase-prevention tab on the
cassette must be in place (or you
must put tape over the hole).
• If the erase-prevention tab is
removed, the cassette will eject
when you press POWER to turn
off the TV/VCR.
• If the tape ends before the
recording is complete, the TV/VCR
will stop recording immediately
and eject the tape.
Helpful Hints
Example:
one-time
recording
TIMER PROGRAMMING
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B - - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
M E N U
B TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USERS SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
TIMER PROGRAMMING
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B 61 -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
TIME SEARCH
MUTE
RECORD
SPEED RESET
0
8 97
5 64
2 31
PAUSE/STILL
+
100
STOP
F.FWD
PLAY
REW
VOL.
DISPLAY
M
E
N
U
POWER
SLEEP/WAKE UP
CH.
A
L
T
.C
H
1-4
1
MC13D1MG 3/22/02 1:26 PM Page 26