Filter
Top Products
40 Wake Up Timer
The Wake Up Timer turns on the TV/VCR automatically at
a specified time within the next 24 hours. You may set the
TV/VCR to turn on at a TV channel or with VCR playback.
To set the Wake Up Timer, follow the steps below.
Before you begin:
● Set the clock. Details are on pages 12-15. If the clock is not
set, you will not be able to set the Wake Up Timer.
● Put a tape in the TV/VCR if you want the TV/VCR to start
tape playback at the specified time.
1
Press SLEEP/WAKE UP until WAKE UP
TIMER appears. Press F.FWD/B or REW/s
until [ON] appears.
WAKE UP B ON/OFF [ON]
TIMER TV/TAPE [TV]
TIME [
12:OOAM
]
4
Press MENU to remove the menu, then press
POWER to turn off the TV/VCR. The TV/VCR
will turn on at the specified time.
WAKE UP ON/OFF [ON]
TIMER B TV/TAPE [TV]
TIME [
12:OOAM
]
2
Press PLAY/▲ or STOP/▼to select TV/TAPE.
Press F.FWD/B or REW/s to select [TV] or
[TAPE]. If you select TV, the current TV channel
will be on when the TV/VCR turns on. Select TAPE
to start tape playback when the TV/VCR turns on.
WAKE UP ON/OFF [ON]
TIMER TV/TAPE [TV]
B TIME [
12:OOAM
]
3
Press PLAY/▲ or STOP/▼ to select TIME.
Press F.FWD/B or REW/s to select your
desired wake up time.
Each button press will increase (or decrease) the
time by 10 minutes.
• To cancel the Wake Up Timer,
press SLEEP/WAKE UP until
WAKE UP TIMER appears, then
press F.FWD/B or REW/s until
[OFF] appears.
Helpful Hint
TIME SEARCH
MUTE
RECORD
SPEED RESET
0
8 97
5 64
2 31
PAUSE/STILL
+
100
STOP
F.FWD
PLAY
REW
VOL.
DISPLAY
M
E
N
U
POWER
SLEEP/WAKE UP
CH.
A
LT
.C
H
1
1-3
4
4
MC13D1MG 3/22/02 1:26 PM Page 40