Filter
Top Products
English
14
AUDIO OUT
DIGITAL
OUT
VIDEO OUT
COAXIAL
AUDIO
IN
STEREO
DIGITAL
Connecting to an stereo
system
AUDIO OUT
DIGIT
AL
OUT
VIDEO OUT
COAXIAL
AUDIO
IN
DIGITAL
AV
R eciever
Receiver has a PCM, Dolby Digital
or MPEG decoder
A
Select one of the video connections
(CVBS VIDEO IN, COMPONENT VIDEO
IN) depending on the options available on
your TV.
B Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In socket on your receiver (cable not
supplied).
C Set the DVD player’s digital output to
PCM or ALL depending on the
capabilities of your receiver (see page 30
{Digital Out}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
Stereo system has right/ left Audio
In sockets
A
Select one of the video connections
(CVBS VIDEO IN, COMPONENT VIDEO
IN) depending on the options available on
your TV.
B Use the audio cables (white/red) to
connect AUDIO OUT (L/R) sockets of
the DVD Player to the corresponding
AUDIO IN sockets on the stereo system
(cable supplied).
Connecting to a digital AV
receiver
Optional connections
TIPS: Before making or changing any connections, make sure that all the devices are disconnected from
the power outlet.
01-37 MDV435_436_37_eng_RC2.indd 1401-37 MDV435_436_37_eng_RC2.indd 14 2006-04-27 5:08:03 PM2006-04-27 5:08:03 PM