Filter
Top Products
English
35
Problem Solution
Tro ubl esh oot ing (continued)
Not able to select some items in the
setup/system menu.
The DVD player does not start
playback.
Picture freezes momentarily during
playback.
Unable to select Progressive Scan on/
off.
Unable to play DivX movies.
No sound during DivX movies
playback.
An DivX movies does not repeat.
– Press STOP button twice before selecting the setup/system
menu.
– Depending on the disc availability, some menu items cannot
be selected.
– Insert a readable disc with the playback side facing down.
– Check the disc type, color system (PAL/NTSC) and region
code.
– Check for any scratches or smudges on the disc.
– Press SETUP to turn off the setup menu screen.
– You may need to enter the password in order to change the
parental rating level or to unlock the disc for playback.
– Moisture may have condensed inside the system. Remove the
disc and leave the system turned on for about an hour.
– Disconnect the power cord from the power outlet for a few
minutes. Reconnect the power cord and try to operate again
as usual.
– Check the disc for ngerprint/scratches and clean with a soft
cloth wiping from center to edge.
– Check that the output of the video signal is switch to
{ YPbPr }.
– Check that the DivX le is encoded in ‘Home Theatre’ mode
with DivX 6.0 encoder.
– Check that the DivX movie downloaded is a complete le.
– The audio codec may not be supported by this DVD player.
– Check that le size of the movie does not exceed the le size
of the disc during downloading.
Tip: DivX is an option for certain models only.
01-37 MDV435_436_37_eng_RC2.indd 3501-37 MDV435_436_37_eng_RC2.indd 35 2006-04-27 5:08:10 PM2006-04-27 5:08:10 PM