Filter
Top Products
18
Menu Operation
Clock Function
Time and Timer setting.
A. Press [MENU] key on front or press [MENU 1] key
on remote control, MENU appears on screen. Select
“CLOCK”.
B. TIME (TIME, TIMER, OFF-TIME, ON-TIME) setting:
Using the [V -] key, hours will increase from “0, 1...
23,24”.
Using the [V+] key, minutes will increase from “00” to “59”.
C. TIME: Using the [V+][V -] key, will change “TIME”.
D. TIMER - Generally, if “ON-TIME” or “ OFF-TIME” is not
set, “TIMER” will not be set. In order to activate the
timer, OFF-TIME and ON-TIME must be programmed
and TIMER must be set to ON.
Using [P+][P-) keys, select “TIMER”. Using [V+]/[V-]
keys, Timer function can be activated.
E. PROGRAM - Using [P+]/[P-] keys, select “PROGRAM”.
Using [V+]/[V-] keys, will change program no. for ON-
TIME.
F. For
ALARM setting, using [V+]/[V-] key to set the time .
1, 2, 3, 5, 10, 20, 30, 60, 90 up to 120 minutes.
Note: The
icon appears on screen . Press any key,
icon will disappear.
Picture Adjustment
Function: BRIGHT, CONTRAST, COLOUR, SHARP and TINT
adjustment.
A. Press [PIC] key continuously, functions as follows:
B. Each value can be controlled by [V+]/[V-] key.
Note:
TINT control will be appeared only if a NTSC
signal is being received.