Filter
Top Products
HOOKING UP YOUR TV (ANTENNA/CABLE CONNECTIONS) (CONT’D)
- 3 -
USING THE FRONT AUDIO/VIDEO IN JACKS
A
UDIO
/V
IDEO
I
N
J
ACKS
Connect a video
cable (not supplied) to the
VIDEO OUT jack of the
camcorder/VCR and to the
VIDEO In jack on the front
of the TV.
When you are
finished watching
the tape, press the
TV/AUX button on
the TV remote con-
trol to return to
viewing normal TV
channels.
If the VCR or cam-
corder has Right
and Left AUDIO
OUT jacks, you will
need a “Y” connec-
tor cable in order
to connect the cam-
corder/VCR to the
TV. Or, check the
owner’s manual of
the camcorder or
VCR. It may explain
how to connect to
a TV that has a sin-
gle AUDIO In jack.
SMART
HELP
When you play a tape,
select A/V IN at the TV.
Press the TV/AUX button
to select A/V IN. A/V IN will
appear on the screen.
Connect an audio cable
(not supplied) to the
AUDIO OUT jack of the
camcorder/VCR and to the
AUDIO In jack on the
front of the TV.
SETTING UP AND USING YOUR TV
AUTO INSTALL
F
ollow these steps to quickly
add area channels into the
TV’s memory.
Press the CH(annel) ▲/▼
buttons to select AUTO
INSTALL. Then, press the
VOL(ume) B or { button
to
enter AUTO INSTALL, which
will set up the channels.
When setup is complete, the
SETUP menu will appear for a
moment, then the lowest stored
channel will appear. Now, when
you press the CH(annel)
▲/▼
buttons, you will only scan
through channels that are
available. You still may select
non-memorized channels by
pressing the Number buttons.
Press the POWER
button to turn ON the TV.
Make sure you are not in A/V
IN mode. (Press the TV/AUX
button so that A/V IN does not
appear on the screen.)
Press the MENU but-
ton. The main menu appears
on the TV screen.
AUTO STORE 31
SETUP B
EXIT B
BRIGHTNESS 24
COLOR 31
PICTURE 31
Press the CH(annel)
▲/▼ buttons to select
SETUP. Then, press the
VOL(ume) B or { button
to continue to the SETUP
menu.
T
he basic Antenna/Cable to
VCR to TV connection is
shown here. If you have a Cable
Box, refer to the VCR owner’s
manual for details.
VCR
TO TV
BASIC CONNECTION
Connect your
Antenna or Cable signal to
the ANTENNA IN jack on
the VCR.
Connect a coaxial
cable to the RF OUT or
ANTENNA OUT jack on
the VCR and to the
ANT(enna) IN jack on
the TV.
The coaxial cable may be
supplied with the VCR.
Coaxial cable
Outdoor
VHF/UHF
Antenna
300 to 75Ω
Adaptor
Cable TV signal
Back of TV
Refer to the VCR
owner's manual for other
possible connections and for
operating details.
VCR
(example only)
F
or more convenient tape
playback from a camcorder
or VCR, use the AUDIO and
VIDEO In jacks on the front of
the TV. These easily accessible
jacks allow quick connections
between the TV and the VCR,
camcorder, or other video
equipment.
Turn on the cam-
corder/VCR and press the
PLAY button on the cam-
corder/VCR.
When you are finished
watching the tape, press
the STOP button on the
camcorder/VCR.
FM ANTENNA EXT
EXIT B
LANGUAGE ENG
AUTO INSTALL B
CHANNEL EDIT B