Filter
Top Products
Automatic Channel Setup 11
2
3
1
4
5
Wait for the VCR to set up
channels.
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you set up channels again. Make each entry within one minute of
the previous entry.
5
Wait for a few minutes while the VCR sets up channels.
When programming is complete, AUTO CH. SET COMPLETED
will appear on-screen. Then, the programming of the lowest chan-
nel number placed in the VCR’s memory will appear on-screen.
Now when you press the CH(annel) 8/9 buttons, you will scan
only through channels you receive.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY 8 or STOP 9 button to select TUNER
SET UP, then press the FF :/OK button.
3
Press the FF :/OK button repeatedly so that ANT (if you
have an antenna) or CABLE (if you have a cable connec-
tion) appears beside CABLE/ANTENNA.
4
Press the STOP 9 button to select AUTO CH. PRO-
GRAMMING, then press the FF :/OK button. AUTO CH.
SET PROCEEDING PLEASE WAIT and a scale that shows the
progress of channel setup will appear on-screen. The VCR will
memorize all the channels you receive.
• If the channel you select has no
broadcast, the screen will be solid
blue.
• The two Line Input modes will
always be stored in the VCR’s mem-
ory at channel 00. To select A/V IN
FRONT or A/V IN REAR, press 0,0,
then press the CH(annel) 8/9 but-
tons so that A/V IN FRONT or A/V
IN REAR appears on-screen briefly.
To exit Line Input mode, use the
CH(annel) 8/9 buttons to select a
channel other than 00.
Helpful Hints
SELECT , 9 CHOOSE :/OK
A CABLE/ANTENNA CABLE
AUTO CH. PROGRAMMING
ADD/DELETE CH.
TO END PUSH EXIT
SELECT , 9 CHOOSE :/OK
A VCR SET UP
TUNER SET UP
INITIAL SET UP
TO END PUSH EXIT
1
4
7
SPEED
CBL/DBS
TV
VCR
MENU
EXIT/STATUS
TIMER
[
REC/OTR
REW
STILL/SLOW
–
L
STOP
PLAY
:
+
S.SEARCH
FF
/OK
cEJECT
POWER
2
5
8
0
QUICK PROGRAMMING
3
6
9
START
DBS
STOP
DAILY
DATE
WEEKLY
CLEAR
CH
VOL
VCR/TV 7;;INDEX ::7
AUDIO/MUTE
::;;
+
–
+
–