Marantz 5411 10470 007M Blu-ray Player User Manual


 
9
Advanced versionSimple version Information
ENGLISH
Basic version
Connections
R
L
AUDIO
VIDEO
VIDEO IN
Y
P
B
PR
COMPONENT
VIDEO IN
R R
L L
Important information
•Connect this unit as follows before using. Make connections according to the equipment you are
connecting.
•Some settings of this unit may be necessary depending on the connection method. Check each
connection item for more information.
•Select the cables (sold separately) according to the components being connected.
NOTE
•Do not plug in the power cord until all connections have been completed.
•When making connections, also refer to the operating instructions of the other components being
connected.
•Be sure to connect the left and right channels properly (left with left, right with right).
•Do not bundle power cords together with connection cables. Doing so can result in noise.
Connecting an AV receiver
For connecting using an HDMI cable, see “Connect” (vpage4). This section describes the connections
not using an HDMI cable.
Connecting to an AV receiver with an analog 2-channel audio
input terminal
•This connection is recommended when the specifications of an AV receiver connected to the unit are
as follows:
•Not supporting HDMI input
•Not supporting digital audio(coaxial) input
•Select the connector to use and connect the device.
Cables used for connections
Audio and Video cable
Audio and Video
cable
(Supplied)
R
L
R
L
(White)
(Red)
(Yellow)
Video cable
Component video
cable
(Sold separately)
(Green)
(Blue)
(Red)
AV receiver
1.UD5005U_ENG_0930.indd 9 2010/10/04 18:00:19