Marantz BD5004 DVD Player User Manual


 
17
ENGLISH
ENGLISH
Introduction Connections Playback Function Setup Others
Playback
Press [POWER ON] or <POWER ON/STANDBY> to turn on the
unit.
The power indicator turns off when the power is on.
Turning the unit to the standby mode
Press [POWER OFF] or <POWER ON/STANDBY> to turn the unit
to the standby mode.
The power indicator lights red.
Disc playback
SD Card playback
Direct Playback (BD/DVD-Video/AVCHD) : page 17
Playing Back a VR mode DVD-RW/-R : page 18
Playing Back an Audio CD or a Disc with
DivX®/MP3/Windows Media™ Audio/JPEG
File : page 26
Kodak Picture CD : page 28
NOTE
may appear at the top-right on the screen when the
operation is prohibited by the disc or this unit.
During the playback of 2-layered disc, pictures may stop
for a moment. This happens when the 1st layer switches
to the 2nd layer. This is not a malfunction.
The operation may vary when you play back with disc
menu. Refer to the manual accompanying the disc for
details.
Reading the SD Memory Card : page 28
Operations Using Disc Menu, Title Menu,
and Popup Menu : page 18
AC
<POWER ON/STANDBY>
B
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
Turning the Power On
Note
Power continues to be supplied to some of the circuitry even
when the power is in the standby mode. When leaving home
for long periods of time or when traveling, unplug the AC
cord from the AC outlet.
A
C
B
[ENTER]
[POWER OFF]
[U / V / Y / Z]
[POWER ON]
Direct Playback
1
Turn on the power of this unit. (Refer to “Turning
the Power On” on this page.)
2
Turn on the display device and select the
appropriate input on the device to which the unit
is connected.
3
Press A to open the disc tray.
4
Place the disc on the disc tray with its label side
facing up.
5
Press A to close the disc tray.
Some discs may start playback automatically.
6
Press B to start playback.
Menu screen may appear.
In this case, use [U / V / Y / Z] to select the desired
item, then press [ENTER].
7
Press C once to stop playback temporarily.
Refer to “Resume Playback” on page 18.
To eject the disc:
Press A to open the disc tray, then remove the disc
before turning the unit to the standby mode.
DVD-V
DVD-VR
AVCHD
BD-V
Align the disc to the
disc tray guide.
It may take a while to load
the disc.
E5KB1UD_v2 _EN.book Page 17 Tuesday, June 30, 2009 11:18 AM