Filter
Top Products
–
22
–
EN
PLAYING A DISC
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
Press the DISPLAY button during
playback to show current Chapter
.
• The elapsed and remaining play-
ing time of the current chapter
will be displayed.
Press the DISPLAY button again
to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
Press the DISPLAY button the
third time.
• The BIT RATE and the current
repeat setting will be displayed.
• If you are playing a dual layered
disc, the layer number will also
be displayed ( L0: Layer 0 is playing. L1: Layer 1 is
playing).
Press the DISPLAY button the fourth time to remove
the display.
4
3
2
1
DVD-V
IIII
T
Changing the On-Screen Display
9/49 0:00:00 -0:00:00
Press the DISPLAY button during playback, the
current Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
Press the DISPLAY button again to show the Total
Tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
Press the DISPLAY button for the third time to
remove the display.
3
2
1
VCDCD
To return to the Marker later, press the SEARCH
MODE button four times (CD, VCD: three times)
during playback and the s or B button to choose
the desired marker, then press the ENTER button.
NOTES:
• Opening the disc tray or turning off the power or select
AC at step and press the ENTER button will erase
all Markers.
•To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
•You can mark up to 10 points.
Press the SEARCH MODE or RETURN button to
exit.
5
2
4
Marker Setup Screen
You can enjoy stereophonic visual space on your existing 2
channel stereo system.
Press the MODE button twice
during playback
.
Press the
ENTER
button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
Press the RETURN button to exit.
Press the MODE button during playback
.
Press the
ENTER
button to set 1(Natural effect),
2(Emphasized effect) or OFF.
Press the RETURN button to exit.
NOTE
:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
3
2
1
WMAMP3CD
3
2
1
VCDDVD-V
Virtual Surround
Adjust the Black Level Settings to make
the black parts of the picture as bright as you preferred.
Press the MODE button during playback.
Press the ENTER button to switch ON/OFF
.
ON (Default) : Makes the dark
parts brighter.
OFF : Shows the original pic-
ture as recorded.
Press the
MODE or RETURN
button to exit.
3
2
1
VCDDVD-V
Black Level Setting
ON
Hints for the On-Screen Display
• C- indicates Chapter repeat
• T- indicates Title or Track repeat
• G- indicates Group (folder) repeat
• A- indicates Disc repeat
• AB- indicates A-B repeat
Use markers to memorise
your favourite places on a disc.
Press the SEARCH MODE
button four times (CD, VCD:
three times) during playback.
• The display screen and Markers
will appear on the TV screen.
Press the s or B button to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that “- : - - : - -” appears
in the display.
When reaches the desired point, press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
3
2
1
VCDCDDVD-V
E57M0UD.QX33 03.10.22 7:07 PM Page 22