Marantz DV4600 DVD Player User Manual


 
13
EN
English
Connection to an audio system
Stereo system
NOTES (for method 2 only):
When using an AV amplifier with a built in decoder (AV control center), Dolby Digital or DTS decoder as shown in the
Method 2, set DOLBY DIGITALor DTSto BITSTREAMaccordingly for audio output in the setup menu (refer to page
24). Set it to PCMor OFFfor the decoder that is not used currently. Playing a DVD using incorrect settings may generate
noise distortion, and may also damage the speakers.
The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD
deck or DAT deck.
Set DOLBY DIGITALto PCM, and DTSto OFFfor audio output in the setup menu for connecting to an MD deck or DAT
deck (refer to page 24).
Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a
decoder, etc., that is not DTS-compatible.
AUDIO
DVD
Audio Input
Jacks
Digital Audio
Input Jacks
(Analog)
AUDIO OUT
DIGITAL OUT
Method 1 DVD Player + Stereo system
Method 2 DVD Player + Dolby Digital decoder or DTS decoder
Dolby Digital decoder
or DTS decoder
Method 1 Method 2
CONNECTIONS
The following show examples of connections commonly used to connect the DVD player to TV and other
components.
If using this DVD player to play back a DVD in a Dolby Digital 5.1 channel surround or DTS surround format,
the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.
By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambi-
ence with powerful and high-quality surround sound of a professional standard, which can be heard in movie
theaters. Use an audio coaxial or optical digital cable (not included) for the audio connections.
NOTES:
Be sure to turn off the power to all components in the system before connecting another component.
Refer to the Instruction Manuals for your TV, Stereo system and any other components to be connected to the
DVD player.
Optical cable (not supplied)
Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame-
ter of 6 inches (15cm) or more when storing them.
Use a cable which is 9.8 feet (3m) or shorter.
Insert cable plugs firmly into the connectors when making connections.
If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
Audio cable
(supplied)
Optical cable
(commercially
available)
Audio Coaxial
Digital cable
(commercially
available)
or
E61M0/M1UD(EN).qx3 05.6.9 11:00 AM Page 13