Marantz DV6001 DVD Player User Manual


 
6
DVD Setup Menu
41
English
Note
Use a longer delay time setting when the surround
speakers are closer to the listener than the front
speakers.
A test tone will be automatically generated to help
you judge the sound level of each
speaker.
CD UPSAMPLING
Default setting: OFF
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling function, the player will
automatically switch to stereo mode.
OFF – Select this to disable CD
upsampling.
88.2kHz (X2) – Select this to convert
the sampling rate of CDs to twice that of
the original.
176.4kHz (X4) – Select this to convert
the sampling rate of CDs to four times
that of the original.
Note
This setting is only valid for signals output from the
analog jacks.
CD upsampling is switched to OFF, if AUDIO OUT
is set to Vsurround and 5.1CH.
AUDIO OUT is switched to 2CH, if CD upsampling
is set to 88.2 kHz or 176.4 kHz.
AUDIO DRC
Default setting: OFF
This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs will be
enhanced to an audible level. This feature
is only applicable for DVD video discs with
Dolby Digital mode.
ON – Turns on AUDIO DRC mode.
OFF – Turns off AUDIO DRC mode.
Select this to enjoy the sound with its full
dynamic range.
Note
Audio DRC is only effective with Dolby Digital
Audio sources.