Filter
Top Products
LCD REMOTE DESCRIPTION OF CONTROLS AND OPERATION
LCD REMOTE
To install the four
supplied AA batteries:
Slide the battery cover off the
back of the remote.
Reattach the battery
cover when completed. The
remote should now be ready for
use.
3
BEGIN
1
STOP
IR Transmitter
(Sending Eye)
Insert (4-AA) batteries
into the battery compartment.
Be sure the (+) and (-) ends of
the batteries line up correctly
(inside of case is marked.)
An optional recharging
dock and rechargeable bat-
tery pack are also available
for the remote.
A light on the front of the
Battery Dock will indicate
when the batteries are fully
charged. Depending upon the
condition of the battery pack
a complete recharge could
take 2-3 hours.
BATTERY RECHARGING
Light Sensor
- Direct Access Buttons -
• The Mute, Channel (+,-), and Volume (+,-) buttons
will operate even when the LCD touchscreen is off.
They can also be programmed to operate a dedicated
component, such as the DPTV, or different devices at
different times.
LCD Touchscreen
- Left/Right Buttons -
• Function of the Left and Right buttons change depend-
ing on the device the remote is controlling.
• The LCD touchscreen display will show the Left and
Right buttons current control function labels.
Learning Eye
Contrast Dial (+,-)
Backlight Button
Serial Port
(for future upgrades)
Battery Cover
INTELLIGENT REMOTE
Y
our remote is a LCD
touchscreen univer-
sal, learn remote that
combines flexibility of
use with maximum
adaptability. Set to auto-
matically work with
your Marantz
HD6400W DPTV and
all its integrated Menu
system features, the
remote also has preset
“Device” operations for
a variety of Audio and
Video accessory prod-
ucts (such as VCR,
DVD, CD, Tape, etc.)
Although the remote’s
preprogrammed operat-
ing codes (RC5/6) were
set to work with
Marantz and Philips
branded products, other
manufacturer’s equip-
ment can easily be con-
trolled through the
remote’s “Learn” mode
capability. Even the
remote’s keypress but-
tons and Device select
list can be customized or
rearranged to better
match the order and
commands for your spe-
cific in-home electron-
ics.
The remote can also
memorize select key but-
ton sequences in order
to automate, or “short-
cut”, a feature function
selection or process.
Once created and placed
in memory the recorded
“macros” will execute
the desired commands
to the various compo-
nents in order to com-
plete, for example, a
VCR movie playback on
the DPTV or other simi-
lar procedure.
Due to the amount of
optional components
available within the
remote’s Device
Reference and Learn
Code Lists, please refer
to the separate full-use
Remote Control
Owner’s Manual for
complete details on its
functions and opera-
tions.
Rechargeable Battery Pack and Dock
- Battery Life Note -
• Use only AA alkaline or lithium batteries for best results.
• Never mix worn and fresh batteries.
• When battery power is running low a Low Battery icon blinks at
the top of the remote LCD display.
• Certain features may continue to operate when battery power is
low, but you won’t be able to use the remote’s learn or customizing
features.
Battery Compartment
Recharging Contacts
To turn the remote
display screen ON, touch the
screen with your finger, then let
go.
Pressing the Backlight button
(on the left side of the remote)
also turns the display ON.
Turn the Contrast dial (on the
left side of the remote) to
adjust the screen’s brightness.
BEGIN
1
• Tap the touchscreen gently when
using the remote. Never use force.
• Do not use pens, or any sharp
object to tap the screen. You might
damage the surface.
• Keep the touchscreen dry. Wipe
off any spills immediately. Never
immerse the remote in water or any
liquid.
• Do not drop the remote on hard
surfaces (or drop anything on the
LCD touchscreen itself.)
• Do not expose the remote to
extreme temperatures.
• Clean the touchscreen with a soft
cloth (dampened slightly if needed.)
Never use abrasives or cleaning
solutions.
The remote will display
the last device screen used (or
the Home screen for all of the
devices the remote is set to
operate.)
Press the Home button
at any time to return to the
remote’s components menu list.
2
DTV
TV
INFO
A/CH1/1
Pre Amp
VCR
DVD
Tuner
DBS
LD
CDR
Tape
CD
Press the button for the
desired device to display a
control panel screen for the
device.
Home Screen
Control Panel
A Device menu can also
be used to select components
from a currently opened con-
trol screen.
Press the Device
tab on the touch-
screen and a Device
list will appear. Just
tap the name of the
device you want to operate.
You can also scroll the Device
list by pressing the Arrow but-
ton to move down or
up the list.
3
Press a button on the
control panel to send a remote
command to the selected
“active” device.
Use the scroll
arrows
to move to the next
(or previous) page
of controls. The touchscreen
will display the current control
screen’s page number, and the
total number of pages available
for the device (1/8; 2/8; etc.)
4
The remote is ready to
send device commands when
the remote icon is shown
(at the center top of the touch-
screen display.)
If another mode label is cover-
ing the remote icon, such as
or , the mode
will need to be reselected.
Tap the Mode
button on the touch-
screen, and reselect
the mode to
return the remote to
its normal operating mode.
5
STOP
2
Side View
CONTROLS
OPERATIONS
3
TOUCHSCREEN USE/CARE