Filter
Top Products
10
ENGLISH
EXTERNAL EQUIPMENT CONNECTION EXTERNAL EQUIPMENT CONNECTION
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
Antenna connection
1. Connect RF out on the VCR to
the Antenna input on the rear of
the TV.
2. Connect the antenna cable to
the antenna in jack on the VCR.
3. Use the TV/AV button to select
TV mode.
4. Press the PLAY button on the
VCR.
SCART 1
1. Connect the A/V out jacks on
the AV device to SCART jack
on the TV.
2. Use the TV/AV button to select
SCART1 mode.
3. Press the PLAY button on the
VCR.
The VCR playback picture
appears on the TV screen.
SCART 2
1. Connect the AV out jacks on the AV device to the SCART on the TV.
2. Use the TV/AV button to select
SCART2 mode.
3. Press the PLAY button on the
DVD.
S-VIDEO input
If using an S-VIDEO source, the picture
quality will be improved over a video
source.
1. Connect the S-VIDEO output of a
VCR to the S-VIDEO input on the
TV.
2. Connect the audio cables from the
S-VIDEO VCR to the L (MONO) R
inputs on the TV.
3. Select S-VIDEO mode by pressing
the TV/AV button repeatedly.
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Headphone jack
Insert the headphone plug to the headphone jack on the TV. You can listen to the
sound through the headphone; no sound from the speaker on the TV. To adjust the
headphone volume, use the Volume menu in the Sound menu.
Sub woofer output
Connect the cable of the sub woofer to the sub woofer output on the TV.
You can listen to the bass well. To adjust the bass volume, use the Sub woofer menu
in the sound menu.
VCR
SCART1SCART2
DC24V
ANT.
SCART
(DVD)
SCART1SCART2
DC24V
ANT.
SCART
(VCR)
SCART1SCART2
DC24V
ANT.
S-VIDEO, L/R
(VCR)
SCART1SCART2
S-VIDEO
DC24V
L
R
ANT.
SCART1SCART2
DC24V
ANT.
Headphone
SCART1SCART2
DC24V
ANT.
Sub woofer