Filter
Top Products
1-20 Connect Peripheral equipment
& Connect your camera or camcorder at the front side of your receiver.
é Connect the equipment to VIDEO 2 and AUDIO L 1 for mono
equipment.
“ For stereo equipment also connect AUDIO R 1.
S-VHS quality with an S-VHS camcorder is obtained by connecting the
S-VHS cables with the S-VHS input 3 and AUDIO inputs 1.
Camera & camcorder
Insert the plug into the headphone socket L at the front side of the
receiver.
The headphone impedance must be between 8 and 2000 Ohm.
The headphone socket has a 3.5 mm jack.
In the SOUND menu select Headphone to adjust the headphone volume
and balance and to select the audio source for your headphone sound.
See p. 14.
Headphone
S•VHS
VIDEO
AUDIO
L
R
1 2
3
n
Video recorder and other peripherals
EXTERNAL
21
VCR 1
CABLE
1
5
2
4
3
& Connect the aerial cables 1, 2 and 3 as shown opposite. Better
picture quality can be obtained if you also connect eurocable
5 to
EXTERNAL 2 and a eurocable 4 to EXTERNAL 1 or 3.
é Look for the test signal of your peripheral in the same way as you do for
a video recorder.
When a video recorder is connected to EXTERNAL 1 you can only record a
programme from your TV.
Only when a video recorder is connected to
EXTERNAL 2 it is possible to
record a programme from your TV as well as from other connected
equipment. See Record with your video recorder, p. 26.
Note:
EXTERNAL 1 can handle CVBS and RGB, EXTERNAL 2 CVBS, Y/C and
RGB,
EXTERNAL 3 only CVBS.