Filter
Top Products
32
Information
Ⅵ PLE
AUTO .............. The brightness of the screen is
adjusted automatically to suit the
picture quality.
LOCK ..............The brightness level is set to
minimum.
Ⅵ ORBITER
ON ...................The picture moves around the screen
intermittently.
OFF .................Orbiter mode does not function.
Ⅵ INVERSE
ON .....................The picture is displayed alternately
between positive image and negative
image.
OFF .................Inverse mode does not function.
WT ..................The entire screen turns white.
Ⅵ Restoring the factory default settings
Select “RESET” from the function menu. Note that this
also restores other settings to the factory defaults.
Resetting to the default values
Use these operations to restore all the picture adjustments,
audio settings, to the factory default values.
Refer to page 18 for items to be reset.
Press the PROCEED button on the remote control unit to
display the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the ▲ and ▼ buttons to select “RESET”, then press
the PROCEED button.
FUNCTION
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
LONG LIFE
CINEMA MODE
RESET
ON
1
OFF
3
ON
:
:
:
:
:
SEL. RETURN
EXIT
OK
PROCEED
1:RGB3 ADJ.
The “RESET” screen appears.
3. Use the ▲ and ▼ buttons to select “RESET”, then press
the PROCEED button.
RESET
RESET
RETURN
OK RETURN
EXITPROCEED
SETTING NOW
RESET
When the “SETTING NOW” screen disappears, the
screen will be restored to the previous “RESET” mode,
then all the settings are restored to the default values.
4. Once the setting is completed ...
Press the EXIT button.
To delete the main menu, press the EXIT button once
more.