Filter
Top Products
17
ENGLISH
2. TIMER
The timer function of the RC3001 can be used
to send a preset remote controller command at a
programmed time.
The Wizz.it 3 editor can be used to operate
multiple devices. One Touch Operation (Macro)
can also use the timer function for transmission.
CHECKING THE SETTINGS
1.
Display the MAIN MENU on the LCD of the
RC3001, then press the button next to the
TIMER indicator.
2.
The TIMER menu is displayed. Pressing
the button next to the CHECK indicator on
the LCD displays the timer settings.
When the LCD appears as shown below,
the timer has not been set.
• Either press the ENTER button or
wait three seconds for the LCD to
automatically return to the TIMER
menu.
• Pressing the Home button from the
TIMER MENU screen returns the LCD
to the MAIN MENU.
OPERATION SETTINGS
1.
Press the button next to the TIMER SET
indicator in the LCD in the TIMER menu
screen to display the timer programming
setting screen.
2.
Use the numeric buttons (0 to 9) and cursor
buttons (t and u) to set the time for the
timer. After making the setting, press the
ENTER button.