Filter
Top Products
- 13 -
Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer to your DVD player’s instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
pl
ayer as illustrated below, switch to HDMI source. See, “Input selection” section.
•
Most DVD players are connected through RCA SOCKETS. Use a RCA video cable to connect
vid
eo input. For enabling audio, use a component audio cable as illustrated below. When
done, switch to F-AV- source. See, “Input selection” section.
• You may also connect through the SCART . Use a SCART cable as shown below.
HDMI
Input
SCART
sockets
HDMI
cable
SCART
cable
RCA
cable
REAR VIEW
Note: These three methods of connection perform the same function but in different levels of
qu
ality. It is not necessary to connect by all three methods.
00-ENG-01-TV-2297W-UK IDTV-1165UK-VGA-10057841.p65 25.06.2008, 09:0613