M-Audio DVR DVR User Manual


 
Delta 1010 Quick Start Guide
4
|
Mac OS X Installation
1. If possible, we recommend that you download the most
recent Delta 1010 drivers by going to the Support >
Drivers page at www.m-audio.com. This ensures that
you’ll have the newest drivers available. If you do not have
Internet access, insert the Delta Series CD-ROM into your
computer to install the drivers that came with your Delta
1010 interface.
a. If you are installing drivers from the Delta Series
CD-ROM, a CD-ROM icon will appear on your
desktop once the disc is inserted into your computer.
Double-click this icon to view the contents of
the disc. Next, double-click “Open Me.” Finally,
select Delta 1010 from the drop-down menu on the
welcome screen and click “Install.”
b. If you are installing drivers from www.m-audio.com,
the downloaded file should automatically mount and
display its contents on the desktop. If this file does
not mount automatically, simply double-click the file
once it has finished downloading to view its contents.
Next, double-click the installer package.
2. Follow the driver installer’s on-screen instructions.
3. Click “Restart” once the installer has completed the
installation.
4. Once your machine has booted, shut down the computer
and disconnect the power cable.
5. Open your computer’s case.
6. Touch your computer’s metal chassis to ground yourself
before coming in contact with any electronic components
inside the computer. Uncontrolled discharge of excess
static electricity may cause damage to electronic
components.
7. Each unused PCI slot should have a metal bracket that
covers the slot’s accompanying access hole on the rear of
the computer. Select one available PCI slot and remove
its metal bracket. Be sure to save the bracket screw
(brackets are usually held in place by one screw) as you
will need it later.
8. Insert your Delta 1010 PCI Host Adapter card into your
chosen PCI slot. Secure the Delta 1010 PCI card in place
using the bracket screw from the previous step. Close the
computer case.
9. Close the case and connect the rack-mount portion of
the interface to the Delta PCI card inside your computer.
Plug in the power adapter to the rack-mount portion of
the interface, then reconnect the computer’s power cord.
Finally, turn on the computer.
10. When the computer has restarted, your Delta 1010
interface will be ready to use.