Filter
Top Products
3. RECORD SETUP
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
RECORD SETUP
1. HDD FULL
2. RECORD SPEED
3. RECORD MODE
4. RECORD AUDIO
5. QUALITY
6. SCHEDULE SETUP
7. CHANNEL SETUP
MENU, ESC: EXIT: : MODIFY
RECORD SETUP
1) HDD FULL: When hard disk is full, DVR next step is kept overwrite record or stop record?
-OVERWRITE / STOP REC
Notice: STOP REC：One hard disk record full, stop record. Two hard disk, both of them record full,
stop record.
Record process OVERWRITE STOP REC
M(99%), S(0%) Æ M(100%), S(0%) To second and record To second and record
M(99%), S(100%) Æ M(100%), S(100%) To second and record To second and record
M(0%), S(99%) Æ M(0%), S(100%) To first and record To first and record
M(100%), S(99%) Æ M(100%), S(100%) To first and record Stop record
Notice:
When hard disk is full, system buzzer on, and then presses ENTER to stop. Next to press REC, over write
message window popup.
"** OVERWRITE CAUTION **"
"THE HDD ARE BOTH FULL,"
"RECORDING WILL DELETE"
"THE OLD IMAGE."
"PRESS [ENTER] TO OVERWRITE."
Press ENTER to continue record.
Over write from the first data area.
Press MENU to exit.
31