1. Connect cameras and monitor to the DVR.
2. Shown below is an example of connecting the DVR to your existing Observation System.
3. Install HDD (The compatible HDD Brands are listed in the following table.)
Please refer to page 19. Appendix #1 for installation instructions.
*The HDD must be installed before turning on the DVR. If HDD is not installed, the DVR would function as a 4 CH multiplexer.
INSTALLATION GUIDE
Before Operation
COMPATIBLE HARD DISK MODELS
4
ManufacturerModelCapacityRotation
HITACHIDeskstar 180 GXP (120 GB)120GB7200 rpm
HITACHIDeskstar 7K250, HDS722516VLAT20
160GB
7200 rpm
HITACHIDeskstar 7K250, HDS722525VLAT80250GB7200 rpm
IBMDeskstar 120GXP (80GB)80GB7200 rpm
IBMDeskstar 120GXP (120GB)120GB7200 rpm
MaxtorDiamondMax 536DX(60GB) 4W060H460GB5400 rpm
MaxtorDiamondMax Plus 980GB7200 rpm
MaxtorDiamondMax Plus 9, Model#6Y120L120GB7200 rpm
MaxtorDiamondMax Plus 9, Model#6Y160L0160GB7200 rpm
Maxtor
MaxLine Plus
Ⅱ
, Model#7Y250P0
250GB7200 rpm
SeagateBarracuda ATA IV, ST380021A80GB7200 rpm
SeagateBarracuda ATA V, ST3120023A120GB7200 rpm
SeagateBarracuda 7200.7 Plus, ST3160023A160GB7200 rpm
Western DigitalCaviar WD1200BB-00CAA1120GB7200 rpm
Western DigitalCaviar WD2000BB-00DWA0200GB7200 rpm
Western DigitalCaviarSE WD2500JB250GB7200 rpm