Filter
Top Products
HVR-04E INSTALLATION AND CONNECTION
18
2003.05.21 (v 1.0)
Hunt Electronic USA, Inc.
(3) Select “Miscellaneous” from the sub-menu list using the [▼] button and press the [ENETR] button.
(4) Select “Remote Control ID,” and press the [ENETR] button.
(5) Select a value using the [◄◄ / ►►] buttons and press the [EXIT] button.
(6) Press the [EXIT] button to exit the Settings Page and return to Monitor mode.
<Note> Remote Control ID
Up to 16 HVR-04Es can be controlled with a single remote controller.
6.3. Selecting HVR-04E
If several HVR-04Es are set with unique ID numbers, they can be controlled with one remote controller.
To select a specific HVR-04E, press the ID button of remote controller until the 8 LEDs on the front of
the HVR-04E light up and a buzzer sounds.
<Note>
Because remote controller ID is sixteen, HVR-04E will correspond.